ClearDrawingWand

C

void ClearDrawingWand(DrawingWand *wand)

ClearDrawingWand() clears resources associated with the drawing wand.- wand: the drawing wand to clear.

CloneDrawingWand

C

DrawingWand *CloneDrawingWand(const DrawingWand *wand)

CloneDrawingWand() makes an exact copy of the specified wand.- wand: the magick wand.

DestroyDrawingWand

C

DrawingWand *DestroyDrawingWand(DrawingWand *wand)

DestroyDrawingWand() frees all resources associated with the drawing wand. Once the drawing wand has been freed, it should not be used and further unless it re-allocated.- wand: the drawing wand to destroy.

DrawAffine

C

void DrawAffine(DrawingWand *wand,const AffineMatrix *affine)

DrawAffine() adjusts the current affine transformation matrix with the specified affine transformation matrix. Note that the current affine transform is adjusted rather than replaced.- wand: Drawing wand - affine: Affine matrix parameters

DrawAnnotation

C

void DrawAnnotation(DrawingWand *wand,const double x,
      const double y,const unsigned char *text)

DrawAnnotation() draws text on the image.- wand: the drawing wand. - x: x ordinate to left of text - y: y ordinate to text baseline - text: text to draw

DrawArc

C

void DrawArc(DrawingWand *wand,const double sx,const double sy,
      const double ex,const double ey,const double sd,const double ed)

DrawArc() draws an arc falling within a specified bounding rectangle on the image.- wand: the drawing wand. - sx: starting x ordinate of bounding rectangle - sy: starting y ordinate of bounding rectangle - ex: ending x ordinate of bounding rectangle - ey: ending y ordinate of bounding rectangle - sd: starting degrees of rotation - ed: ending degrees of rotation

DrawBezier

C

void DrawBezier(DrawingWand *wand,
      const size_t number_coordinates,const PointInfo *coordinates)

DrawBezier() draws a bezier curve through a set of points on the image.- wand: the drawing wand. - number_coordinates: number of coordinates - coordinates: coordinates

DrawCircle

C

void DrawCircle(DrawingWand *wand,const double ox,
      const double oy,const double px, const double py)

DrawCircle() draws a circle on the image.- wand: the drawing wand. - ox: origin x ordinate - oy: origin y ordinate - px: perimeter x ordinate - py: perimeter y ordinate

DrawClearException

C

MagickBooleanType DrawClearException(DrawWand *wand)

DrawClearException() clear any exceptions associated with the wand.- wand: the drawing wand.

DrawComposite

C

MagickBooleanType DrawComposite(DrawingWand *wand,
      const CompositeOperator compose,const double x,
      const double y,const double width,const double height,
      MagickWand *magick_wand)

DrawComposite() composites an image onto the current image, using the specified composition operator, specified position, and at the specified size.- wand: the drawing wand. - compose: composition operator - x: x ordinate of top left corner - y: y ordinate of top left corner - width: Width to resize image to prior to compositing. Specify zero to use existing width. - height: Height to resize image to prior to compositing. Specify zero to use existing height. - magick_wand: Image to composite is obtained from this wand.

DrawColor

C

void DrawColor(DrawingWand *wand,const double x,const double y,
      const PaintMethod paint_method)

DrawColor() draws color on image using the current fill color, starting at specified position, and using specified paint method. The available paint methods are:<pre class="text"> PointMethod: Recolors the target pixel ReplaceMethod: Recolor any pixel that matches the target pixel. FloodfillMethod: Recolors target pixels and matching neighbors. ResetMethod: Recolor all pixels.</pre>- wand: the drawing wand. - x: x ordinate. - y: y ordinate. - paint_method: paint method.

DrawComment

C

void DrawComment(DrawingWand *wand,const char *comment)

DrawComment() adds a comment to a vector output stream.- wand: the drawing wand. - comment: comment text

DrawEllipse

C

void DrawEllipse(DrawingWand *wand,const double ox,const double oy,
       const double rx,const double ry,const double start,const double end)

DrawEllipse() draws an ellipse on the image.- wand: the drawing wand. - ox: origin x ordinate - oy: origin y ordinate - rx: radius in x - ry: radius in y - start: starting rotation in degrees - end: ending rotation in degrees

DrawGetBorderColor

C

void DrawGetBorderColor(const DrawingWand *wand,
      PixelWand *border_color)

DrawGetBorderColor() returns the border color used for drawing bordered objects.- wand: the drawing wand. - border_color: Return the border color.

DrawGetClipPath

C

char *DrawGetClipPath(const DrawingWand *wand)

DrawGetClipPath() obtains the current clipping path ID. The value returned must be deallocated by the user when it is no longer needed.- wand: the drawing wand.

DrawGetClipRule

C

FillRule DrawGetClipRule(const DrawingWand *wand)

DrawGetClipRule() returns the current polygon fill rule to be used by the clipping path.- wand: the drawing wand.

DrawGetClipUnits

C

ClipPathUnits DrawGetClipUnits(const DrawingWand *wand)

DrawGetClipUnits() returns the interpretation of clip path units.- wand: the drawing wand.

DrawGetDensity

C

char *DrawGetDensity(const DrawingWand *wand)

DrawGetDensity() obtains the vertical and horizontal resolution. The value returned must be deallocated by the user when it is no longer needed.- wand: the drawing wand.

DrawGetException

C

char *DrawGetException(const DrawWand *wand,
      ExceptionType *severity)

DrawGetException() returns the severity, reason, and description of any error that occurs when using other methods in this API.- wand: the drawing wand. - severity: the severity of the error is returned here.

DrawGetExceptionType

C

ExceptionType DrawGetExceptionType(const DrawWand *wand)

DrawGetExceptionType() the exception type associated with the wand. If no exception has occurred, UndefinedExceptionType is returned.- wand: the magick wand.

DrawGetFillColor

C

void DrawGetFillColor(const DrawingWand *wand,
      PixelWand *fill_color)

DrawGetFillColor() returns the fill color used for drawing filled objects.- wand: the drawing wand. - fill_color: Return the fill color.

DrawGetFillOpacity

C

double DrawGetFillOpacity(const DrawingWand *wand)

DrawGetFillOpacity() returns the opacity used when drawing using the fill color or fill texture. Fully opaque is 1.0.- wand: the drawing wand.

DrawGetFillRule

C

FillRule DrawGetFillRule(const DrawingWand *wand)

DrawGetFillRule() returns the fill rule used while drawing polygons.- wand: the drawing wand.

DrawGetFont

C

char *DrawGetFont(const DrawingWand *wand)

DrawGetFont() returns a null-terminaged string specifying the font used when annotating with text. The value returned must be freed by the user when no longer needed.- wand: the drawing wand.

DrawGetFontFamily

C

char *DrawGetFontFamily(const DrawingWand *wand)

DrawGetFontFamily() returns the font family to use when annotating with text. The value returned must be freed by the user when it is no longer needed.- wand: the drawing wand.

DrawGetFontResolution

C

DrawBooleanType DrawGetFontResolution(const DrawingWand *wand,
      double *x,double *y)

DrawGetFontResolution() gets the image X and Y resolution.- wand: the magick wand. - x: the x-resolution. - y: the y-resolution.

DrawGetFontSize

C

double DrawGetFontSize(const DrawingWand *wand)

DrawGetFontSize() returns the font pointsize used when annotating with text.- wand: the drawing wand.

DrawGetFontStretch

C

StretchType DrawGetFontStretch(const DrawingWand *wand)

DrawGetFontStretch() returns the font stretch used when annotating with text.- wand: the drawing wand.

DrawGetFontStyle

C

StyleType DrawGetFontStyle(const DrawingWand *wand)

DrawGetFontStyle() returns the font style used when annotating with text.- wand: the drawing wand.

DrawGetFontWeight

C

size_t DrawGetFontWeight(const DrawingWand *wand)

DrawGetFontWeight() returns the font weight used when annotating with text.- wand: the drawing wand.

DrawGetGravity

C

GravityType DrawGetGravity(const DrawingWand *wand)

DrawGetGravity() returns the text placement gravity used when annotating with text.- wand: the drawing wand.

DrawGetOpacity

C

double DrawGetOpacity(const DrawingWand *wand)

DrawGetOpacity() returns the opacity used when drawing with the fill or stroke color or texture. Fully opaque is 1.0.- wand: the drawing wand.

DrawGetStrokeAntialias

C

MagickBooleanType DrawGetStrokeAntialias(const DrawingWand *wand)

DrawGetStrokeAntialias() returns the current stroke antialias setting. Stroked outlines are antialiased by default. When antialiasing is disabled stroked pixels are thresholded to determine if the stroke color or underlying canvas color should be used.- wand: the drawing wand.

DrawGetStrokeColor

C

void DrawGetStrokeColor(const DrawingWand *wand,
      PixelWand *stroke_color)

DrawGetStrokeColor() returns the color used for stroking object outlines.- wand: the drawing wand. - stroke_color: Return the stroke color.

DrawGetStrokeDashArray

C

double *DrawGetStrokeDashArray(const DrawingWand *wand,
      size_t *number_elements)

DrawGetStrokeDashArray() returns an array representing the pattern of dashes and gaps used to stroke paths (see DrawSetStrokeDashArray). The array must be freed once it is no longer required by the user.- wand: the drawing wand. - number_elements: address to place number of elements in dash array

DrawGetStrokeDashOffset

C

double DrawGetStrokeDashOffset(const DrawingWand *wand)

DrawGetStrokeDashOffset() returns the offset into the dash pattern to start the dash.- wand: the drawing wand.

DrawGetStrokeLineCap

C

LineCap DrawGetStrokeLineCap(const DrawingWand *wand)

DrawGetStrokeLineCap() returns the shape to be used at the end of open subpaths when they are stroked. Values of LineCap are UndefinedCap, ButtCap, RoundCap, and SquareCap.- wand: the drawing wand.

DrawGetStrokeLineJoin

C

LineJoin DrawGetStrokeLineJoin(const DrawingWand *wand)

DrawGetStrokeLineJoin() returns the shape to be used at the corners of paths (or other vector shapes) when they are stroked. Values of LineJoin are UndefinedJoin, MiterJoin, RoundJoin, and BevelJoin.- wand: the drawing wand.

DrawGetStrokeMiterLimit

C

size_t DrawGetStrokeMiterLimit(const DrawingWand *wand)

DrawGetStrokeMiterLimit() returns the miter limit. When two line segments meet at a sharp angle and miter joins have been specified for 'lineJoin', it is possible for the miter to extend far beyond the thickness of the line stroking the path. The miterLimit' imposes a limit on the ratio of the miter length to the 'lineWidth'.- wand: the drawing wand.

DrawGetStrokeOpacity

C

double DrawGetStrokeOpacity(const DrawingWand *wand)

DrawGetStrokeOpacity() returns the opacity of stroked object outlines.- wand: the drawing wand.

DrawGetStrokeWidth

C

double DrawGetStrokeWidth(const DrawingWand *wand)

DrawGetStrokeWidth() returns the width of the stroke used to draw object outlines.- wand: the drawing wand.

DrawGetTextAlignment

C

AlignType DrawGetTextAlignment(const DrawingWand *wand)

DrawGetTextAlignment() returns the alignment applied when annotating with text.- wand: the drawing wand.

DrawGetTextAntialias

C

MagickBooleanType DrawGetTextAntialias(const DrawingWand *wand)

DrawGetTextAntialias() returns the current text antialias setting, which determines whether text is antialiased. Text is antialiased by default.- wand: the drawing wand.

DrawGetTextDecoration

C

DecorationType DrawGetTextDecoration(const DrawingWand *wand)

DrawGetTextDecoration() returns the decoration applied when annotating with text.- wand: the drawing wand.

DrawGetTextDirection

C

DirectionType DrawGetTextDirection(const DrawingWand *wand)

DrawGetTextDirection() returns the direction that will be used when annotating with text.- wand: the drawing wand.

DrawGetTextEncoding

C

char *DrawGetTextEncoding(const DrawingWand *wand)

DrawGetTextEncoding() returns a null-terminated string which specifies the code set used for text annotations. The string must be freed by the user once it is no longer required.- wand: the drawing wand.

DrawGetTextKerning

C

double DrawGetTextKerning(DrawingWand *wand)

DrawGetTextKerning() gets the spacing between characters in text.- wand: the drawing wand.

DrawGetTextInterlineSpacing

C

double DrawGetTextInterwordSpacing(DrawingWand *wand)

DrawGetTextInterlineSpacing() gets the spacing between lines in text.- wand: the drawing wand.

DrawGetTextInterwordSpacing

C

double DrawGetTextInterwordSpacing(DrawingWand *wand)

DrawGetTextInterwordSpacing() gets the spacing between words in text.- wand: the drawing wand.

DrawGetVectorGraphics

C

char *DrawGetVectorGraphics(DrawingWand *wand)

DrawGetVectorGraphics() returns a null-terminated string which specifies the vector graphics generated by any graphics calls made since the wand was instantiated. The string must be freed by the user once it is no longer required.- wand: the drawing wand.

DrawGetTextUnderColor

C

void DrawGetTextUnderColor(const DrawingWand *wand,
      PixelWand *under_color)

DrawGetTextUnderColor() returns the color of a background rectangle to place under text annotations.- wand: the drawing wand. - under_color: Return the under color.

DrawLine

C

void DrawLine(DrawingWand *wand,const double sx,const double sy,
      const double ex,const double ey)

DrawLine() draws a line on the image using the current stroke color, stroke opacity, and stroke width.- wand: the drawing wand. - sx: starting x ordinate - sy: starting y ordinate - ex: ending x ordinate - ey: ending y ordinate

DrawMatte

C

void DrawMatte(DrawingWand *wand,const double x,const double y,
      const PaintMethod paint_method)

DrawMatte() paints on the image's opacity channel in order to set effected pixels to transparent. to influence the opacity of pixels. The available paint methods are:<pre class="text"> PointMethod: Select the target pixel ReplaceMethod: Select any pixel that matches the target pixel. FloodfillMethod: Select the target pixel and matching neighbors. FillToBorderMethod: Select the target pixel and neighbors not matchingborder color. ResetMethod: Select all pixels.</pre>- wand: the drawing wand. - x: x ordinate - y: y ordinate - paint_method: paint method.

DrawPathClose

C

void DrawPathClose(DrawingWand *wand)

DrawPathClose() adds a path element to the current path which closes the current subpath by drawing a straight line from the current point to the current subpath's most recent starting point (usually, the most recent moveto point).- wand: the drawing wand.

DrawPathCurveToAbsolute

C

void DrawPathCurveToAbsolute(DrawingWand *wand,const double x1,
      const double y1,const double x2,const double y2,const double x,
      const double y)

DrawPathCurveToAbsolute() draws a cubic Bezier curve from the current point to (x,y) using (x1,y1) as the control point at the beginning of the curve and (x2,y2) as the control point at the end of the curve using absolute coordinates. At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.- wand: the drawing wand. - x1: x ordinate of control point for curve beginning - y1: y ordinate of control point for curve beginning - x2: x ordinate of control point for curve ending - y2: y ordinate of control point for curve ending - x: x ordinate of the end of the curve - y: y ordinate of the end of the curve

DrawPathCurveToRelative

C

void DrawPathCurveToRelative(DrawingWand *wand,const double x1,
      const double y1,const double x2,const double y2,const double x,
      const double y)

DrawPathCurveToRelative() draws a cubic Bezier curve from the current point to (x,y) using (x1,y1) as the control point at the beginning of the curve and (x2,y2) as the control point at the end of the curve using relative coordinates. At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.- wand: the drawing wand. - x1: x ordinate of control point for curve beginning - y1: y ordinate of control point for curve beginning - x2: x ordinate of control point for curve ending - y2: y ordinate of control point for curve ending - x: x ordinate of the end of the curve - y: y ordinate of the end of the curve

DrawPathCurveToQuadraticBezierAbsolute

C

void DrawPathCurveToQuadraticBezierAbsolute(DrawingWand *wand,
      const double x1,const double y1,const double x,const double y)

DrawPathCurveToQuadraticBezierAbsolute() draws a quadratic Bezier curve from the current point to (x,y) using (x1,y1) as the control point using absolute coordinates. At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.- wand: the drawing wand. - x1: x ordinate of the control point - y1: y ordinate of the control point - x: x ordinate of final point - y: y ordinate of final point

DrawPathCurveToQuadraticBezierRelative

C

void DrawPathCurveToQuadraticBezierRelative(DrawingWand *wand,
      const double x1,const double y1,const double x,const double y)

DrawPathCurveToQuadraticBezierRelative() draws a quadratic Bezier curve from the current point to (x,y) using (x1,y1) as the control point using relative coordinates. At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.- wand: the drawing wand. - x1: x ordinate of the control point - y1: y ordinate of the control point - x: x ordinate of final point - y: y ordinate of final point

DrawPathCurveToQuadraticBezierSmoothAbsolute

C

void DrawPathCurveToQuadraticBezierSmoothAbsolute(
      DrawingWand *wand,const double x,const double y)

DrawPathCurveToQuadraticBezierSmoothAbsolute() draws a quadratic Bezier curve (using absolute coordinates) from the current point to (x,y). The control point is assumed to be the reflection of the control point on the previous command relative to the current point. (If there is no previous command or if the previous command was not a DrawPathCurveToQuadraticBezierAbsolute, DrawPathCurveToQuadraticBezierRelative, DrawPathCurveToQuadraticBezierSmoothAbsolute or DrawPathCurveToQuadraticBezierSmoothRelative, assume the control point is coincident with the current point.). At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.- wand: the drawing wand. - x: x ordinate of final point - y: y ordinate of final point

DrawPathCurveToQuadraticBezierSmoothRelative

C

void DrawPathCurveToQuadraticBezierSmoothRelative(DrawingWand *wand,
      const double x,const double y)

DrawPathCurveToQuadraticBezierSmoothRelative() draws a quadratic Bezier curve (using relative coordinates) from the current point to (x,y). The control point is assumed to be the reflection of the control point on the previous command relative to the current point. (If there is no previous command or if the previous command was not a DrawPathCurveToQuadraticBezierAbsolute, DrawPathCurveToQuadraticBezierRelative, DrawPathCurveToQuadraticBezierSmoothAbsolute or DrawPathCurveToQuadraticBezierSmoothRelative, assume the control point is coincident with the current point.). At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.- wand: the drawing wand. - x: x ordinate of final point - y: y ordinate of final point

DrawPathCurveToSmoothAbsolute

C

void DrawPathCurveToSmoothAbsolute(DrawingWand *wand,
      const double x2,const double y2,const double x,const double y)

DrawPathCurveToSmoothAbsolute() draws a cubic Bezier curve from the current point to (x,y) using absolute coordinates. The first control point is assumed to be the reflection of the second control point on the previous command relative to the current point. (If there is no previous command or if the previous command was not an DrawPathCurveToAbsolute, DrawPathCurveToRelative, DrawPathCurveToSmoothAbsolute or DrawPathCurveToSmoothRelative, assume the first control point is coincident with the current point.) (x2,y2) is the second control point (i.e., the control point at the end of the curve). At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.- wand: the drawing wand. - x2: x ordinate of second control point - y2: y ordinate of second control point - x: x ordinate of termination point - y: y ordinate of termination point

DrawPathCurveToSmoothRelative

C

void DrawPathCurveToSmoothRelative(DrawingWand *wand,
      const double x2,const double y2,const double x,const double y)

DrawPathCurveToSmoothRelative() draws a cubic Bezier curve from the current point to (x,y) using relative coordinates. The first control point is assumed to be the reflection of the second control point on the previous command relative to the current point. (If there is no previous command or if the previous command was not an DrawPathCurveToAbsolute, DrawPathCurveToRelative, DrawPathCurveToSmoothAbsolute or DrawPathCurveToSmoothRelative, assume the first control point is coincident with the current point.) (x2,y2) is the second control point (i.e., the control point at the end of the curve). At the end of the command, the new current point becomes the final (x,y) coordinate pair used in the polybezier.- wand: the drawing wand. - x2: x ordinate of second control point - y2: y ordinate of second control point - x: x ordinate of termination point - y: y ordinate of termination point

DrawPathEllipticArcAbsolute

C

void DrawPathEllipticArcAbsolute(DrawingWand *wand,
      const double rx,const double ry,const double x_axis_rotation,
      const MagickBooleanType large_arc_flag,
      const MagickBooleanType sweep_flag,const double x,const double y)

DrawPathEllipticArcAbsolute() draws an elliptical arc from the current point to (x, y) using absolute coordinates. The size and orientation of the ellipse are defined by two radii (rx, ry) and an xAxisRotation, which indicates how the ellipse as a whole is rotated relative to the current coordinate system. The center (cx, cy) of the ellipse is calculated automagically to satisfy the constraints imposed by the other parameters. largeArcFlag and sweepFlag contribute to the automatic calculations and help determine how the arc is drawn. If largeArcFlag is true then draw the larger of the available arcs. If sweepFlag is true, then draw the arc matching a clock-wise rotation.- wand: the drawing wand. - rx: x radius - ry: y radius - x_axis_rotation: indicates how the ellipse as a whole is rotated relative to the current coordinate system - large_arc_flag: If non-zero (true) then draw the larger of the available arcs - sweep_flag: If non-zero (true) then draw the arc matching a clock-wise rotation

DrawPathEllipticArcRelative

C

void DrawPathEllipticArcRelative(DrawingWand *wand,
      const double rx,const double ry,const double x_axis_rotation,
      const MagickBooleanType large_arc_flag,
      const MagickBooleanType sweep_flag,const double x,const double y)

DrawPathEllipticArcRelative() draws an elliptical arc from the current point to (x, y) using relative coordinates. The size and orientation of the ellipse are defined by two radii (rx, ry) and an xAxisRotation, which indicates how the ellipse as a whole is rotated relative to the current coordinate system. The center (cx, cy) of the ellipse is calculated automagically to satisfy the constraints imposed by the other parameters. largeArcFlag and sweepFlag contribute to the automatic calculations and help determine how the arc is drawn. If largeArcFlag is true then draw the larger of the available arcs. If sweepFlag is true, then draw the arc matching a clock-wise rotation.- wand: the drawing wand. - rx: x radius - ry: y radius - x_axis_rotation: indicates how the ellipse as a whole is rotated relative to the current coordinate system - large_arc_flag: If non-zero (true) then draw the larger of the available arcs - sweep_flag: If non-zero (true) then draw the arc matching a clock-wise rotation

DrawPathFinish

C

void DrawPathFinish(DrawingWand *wand)

DrawPathFinish() terminates the current path.- wand: the drawing wand.

DrawPathLineToAbsolute

C

void DrawPathLineToAbsolute(DrawingWand *wand,const double x,
      const double y)

DrawPathLineToAbsolute() draws a line path from the current point to the given coordinate using absolute coordinates. The coordinate then becomes the new current point.- wand: the drawing wand. - x: target x ordinate - y: target y ordinate

DrawPathLineToRelative

C

void DrawPathLineToRelative(DrawingWand *wand,const double x,
      const double y)

DrawPathLineToRelative() draws a line path from the current point to the given coordinate using relative coordinates. The coordinate then becomes the new current point.- wand: the drawing wand. - x: target x ordinate - y: target y ordinate

DrawPathLineToHorizontalAbsolute

C

void DrawPathLineToHorizontalAbsolute(DrawingWand *wand,
      const double x)

DrawPathLineToHorizontalAbsolute() draws a horizontal line path from the current point to the target point using absolute coordinates. The target point then becomes the new current point.- wand: the drawing wand. - x: target x ordinate

DrawPathLineToHorizontalRelative

C

void DrawPathLineToHorizontalRelative(DrawingWand *wand,
      const double x)

DrawPathLineToHorizontalRelative() draws a horizontal line path from the current point to the target point using relative coordinates. The target point then becomes the new current point.- wand: the drawing wand. - x: target x ordinate

DrawPathLineToVerticalAbsolute

C

void DrawPathLineToVerticalAbsolute(DrawingWand *wand,
      const double y)

DrawPathLineToVerticalAbsolute() draws a vertical line path from the current point to the target point using absolute coordinates. The target point then becomes the new current point.- wand: the drawing wand. - y: target y ordinate

DrawPathLineToVerticalRelative

C

void DrawPathLineToVerticalRelative(DrawingWand *wand,
      const double y)

DrawPathLineToVerticalRelative() draws a vertical line path from the current point to the target point using relative coordinates. The target point then becomes the new current point.- wand: the drawing wand. - y: target y ordinate

DrawPathMoveToAbsolute

C

void DrawPathMoveToAbsolute(DrawingWand *wand,const double x,
      const double y)

DrawPathMoveToAbsolute() starts a new sub-path at the given coordinate using absolute coordinates. The current point then becomes the specified coordinate.- wand: the drawing wand. - x: target x ordinate - y: target y ordinate

DrawPathMoveToRelative

C

void DrawPathMoveToRelative(DrawingWand *wand,const double x,
      const double y)

DrawPathMoveToRelative() starts a new sub-path at the given coordinate using relative coordinates. The current point then becomes the specified coordinate.- wand: the drawing wand. - x: target x ordinate - y: target y ordinate

DrawPathStart

C

void DrawPathStart(DrawingWand *wand)

DrawPathStart() declares the start of a path drawing list which is terminated by a matching DrawPathFinish() command. All other DrawPath commands must be enclosed between a DrawPathStart() and a DrawPathFinish() command. This is because path drawing commands are subordinate commands and they do not function by themselves.- wand: the drawing wand.

DrawPoint

C

void DrawPoint(DrawingWand *wand,const double x,const double y)

DrawPoint() draws a point using the current fill color.- wand: the drawing wand. - x: target x coordinate - y: target y coordinate

DrawPolygon

C

void DrawPolygon(DrawingWand *wand,
      const size_t number_coordinates,const PointInfo *coordinates)

DrawPolygon() draws a polygon using the current stroke, stroke width, and fill color or texture, using the specified array of coordinates.- wand: the drawing wand. - number_coordinates: number of coordinates - coordinates: coordinate array

DrawPolyline

C

void DrawPolyline(DrawingWand *wand,
      const size_t number_coordinates,const PointInfo *coordinates)

DrawPolyline() draws a polyline using the current stroke, stroke width, and fill color or texture, using the specified array of coordinates.- wand: the drawing wand. - number_coordinates: number of coordinates - coordinates: coordinate array

DrawPopClipPath

C

void DrawPopClipPath(DrawingWand *wand)

DrawPopClipPath() terminates a clip path definition.- wand: the drawing wand.

DrawPopDefs

C

void DrawPopDefs(DrawingWand *wand)

DrawPopDefs() terminates a definition list.- wand: the drawing wand.

DrawPopPattern

C

MagickBooleanType DrawPopPattern(DrawingWand *wand)

DrawPopPattern() terminates a pattern definition.- wand: the drawing wand.

DrawPushClipPath

C

void DrawPushClipPath(DrawingWand *wand,const char *clip_mask_id)

DrawPushClipPath() starts a clip path definition which is comprized of any number of drawing commands and terminated by a DrawPopClipPath() command.- wand: the drawing wand. - clip_mask_id: string identifier to associate with the clip path for later use.

DrawPushDefs

C

void DrawPushDefs(DrawingWand *wand)

DrawPushDefs() indicates that commands up to a terminating DrawPopDefs() command create named elements (e.g. clip-paths, textures, etc.) which may safely be processed earlier for the sake of efficiency.- wand: the drawing wand.

DrawPushPattern

C

MagickBooleanType DrawPushPattern(DrawingWand *wand,
      const char *pattern_id,const double x,const double y,
      const double width,const double height)

DrawPushPattern() indicates that subsequent commands up to a DrawPopPattern() command comprise the definition of a named pattern. The pattern space is assigned top left corner coordinates, a width and height, and becomes its own drawing space. Anything which can be drawn may be used in a pattern definition. Named patterns may be used as stroke or brush definitions.- wand: the drawing wand. - pattern_id: pattern identification for later reference - x: x ordinate of top left corner - y: y ordinate of top left corner - width: width of pattern space - height: height of pattern space

DrawRectangle

C

void DrawRectangle(DrawingWand *wand,const double x1,
      const double y1,const double x2,const double y2)

DrawRectangle() draws a rectangle given two coordinates and using the current stroke, stroke width, and fill settings.- x1: x ordinate of first coordinate - y1: y ordinate of first coordinate - x2: x ordinate of second coordinate - y2: y ordinate of second coordinate

DrawResetVectorGraphics

C

void DrawResetVectorGraphics(DrawingWand *wand)

DrawResetVectorGraphics() resets the vector graphics associated with the specified wand.- wand: the drawing wand.

DrawRotate

C

void DrawRotate(DrawingWand *wand,const double degrees)

DrawRotate() applies the specified rotation to the current coordinate space.- wand: the drawing wand. - degrees: degrees of rotation

DrawRoundRectangle

C

void DrawRoundRectangle(DrawingWand *wand,double x1,double y1,
      double x2,double y2,double rx,double ry)

DrawRoundRectangle() draws a rounted rectangle given two coordinates, x &amp; y corner radiuses and using the current stroke, stroke width, and fill settings.- wand: the drawing wand. - x1: x ordinate of first coordinate - y1: y ordinate of first coordinate - x2: x ordinate of second coordinate - y2: y ordinate of second coordinate - rx: radius of corner in horizontal direction - ry: radius of corner in vertical direction

DrawScale

C

void DrawScale(DrawingWand *wand,const double x,const double y)

DrawScale() adjusts the scaling factor to apply in the horizontal and vertical directions to the current coordinate space.- wand: the drawing wand. - x: horizontal scale factor - y: vertical scale factor

DrawSetBorderColor

C

void DrawSetBorderColor(DrawingWand *wand,const PixelWand *border_wand)

DrawSetBorderColor() sets the border color to be used for drawing bordered objects.- wand: the drawing wand. - border_wand: border wand.

DrawSetClipPath

C

MagickBooleanType DrawSetClipPath(DrawingWand *wand,
      const char *clip_mask)

DrawSetClipPath() associates a named clipping path with the image. Only the areas drawn on by the clipping path will be modified as ssize_t as it remains in effect.- wand: the drawing wand. - clip_mask: name of clipping path to associate with image

DrawSetClipRule

C

void DrawSetClipRule(DrawingWand *wand,const FillRule fill_rule)

DrawSetClipRule() set the polygon fill rule to be used by the clipping path.- wand: the drawing wand. - fill_rule: fill rule (EvenOddRule or NonZeroRule)

DrawSetClipUnits

C

void DrawSetClipUnits(DrawingWand *wand,
      const ClipPathUnits clip_units)

DrawSetClipUnits() sets the interpretation of clip path units.- wand: the drawing wand. - clip_units: units to use (UserSpace, UserSpaceOnUse, or ObjectBoundingBox)

DrawSetDensity

C

MagickBooleanType DrawSetDensity(DrawingWand *wand,
      const char *density)

DrawSetDensity() sets the vertical and horizontal resolution.- wand: the drawing wand. - density: the vertical and horizontal resolution.

DrawSetFillColor

C

void DrawSetFillColor(DrawingWand *wand,const PixelWand *fill_wand)

DrawSetFillColor() sets the fill color to be used for drawing filled objects.

- wand: the drawing wand. - fill_wand: fill wand.

DrawSetFillOpacity

C

void DrawSetFillOpacity(DrawingWand *wand,const double fill_opacity)

DrawSetFillOpacity() sets the opacity to use when drawing using the fill color or fill texture. Fully opaque is 1.0.- wand: the drawing wand. - fill_opacity: fill opacity

DrawSetFontResolution

C

MagickBooleanType DrawSetFontResolution(DrawingWand *wand,
      const double x_resolution,const double y_resolution)

DrawSetFontResolution() sets the image resolution.- wand: the magick wand. - x_resolution: the image x resolution. - y_resolution: the image y resolution.

DrawSetOpacity

C

void DrawSetOpacity(DrawingWand *wand,const double opacity)

DrawSetOpacity() sets the opacity to use when drawing using the fill or stroke color or texture. Fully opaque is 1.0.- wand: the drawing wand. - opacity: fill opacity

DrawSetFillPatternURL

C

MagickBooleanType DrawSetFillPatternURL(DrawingWand *wand,
      const char *fill_url)

DrawSetFillPatternURL() sets the URL to use as a fill pattern for filling objects. Only local URLs ("#identifier") are supported at this time. These local URLs are normally created by defining a named fill pattern with DrawPushPattern/DrawPopPattern.- wand: the drawing wand. - fill_url: URL to use to obtain fill pattern.

DrawSetFillRule

C

void DrawSetFillRule(DrawingWand *wand,const FillRule fill_rule)

DrawSetFillRule() sets the fill rule to use while drawing polygons.- wand: the drawing wand. - fill_rule: fill rule (EvenOddRule or NonZeroRule)

DrawSetFont

C

MagickBooleanType DrawSetFont(DrawingWand *wand,const char *font_name)

DrawSetFont() sets the fully-sepecified font to use when annotating with text.- wand: the drawing wand. - font_name: font name

DrawSetFontFamily

C

MagickBooleanType DrawSetFontFamily(DrawingWand *wand,
      const char *font_family)

DrawSetFontFamily() sets the font family to use when annotating with text.- wand: the drawing wand. - font_family: font family

DrawSetFontSize

C

void DrawSetFontSize(DrawingWand *wand,const double pointsize)

DrawSetFontSize() sets the font pointsize to use when annotating with text.- wand: the drawing wand. - pointsize: text pointsize

DrawSetFontStretch

C

void DrawSetFontStretch(DrawingWand *wand,
      const StretchType font_stretch)

DrawSetFontStretch() sets the font stretch to use when annotating with text. The AnyStretch enumeration acts as a wild-card "don't care" option.- wand: the drawing wand. - font_stretch: font stretch (NormalStretch, UltraCondensedStretch, CondensedStretch, SemiCondensedStretch, SemiExpandedStretch, ExpandedStretch, ExtraExpandedStretch, UltraExpandedStretch, AnyStretch)

DrawSetFontStyle

C

void DrawSetFontStyle(DrawingWand *wand,const StyleType style)

DrawSetFontStyle() sets the font style to use when annotating with text. The AnyStyle enumeration acts as a wild-card "don't care" option.- wand: the drawing wand. - style: font style (NormalStyle, ItalicStyle, ObliqueStyle, AnyStyle)

DrawSetFontWeight

C

void DrawSetFontWeight(DrawingWand *wand,
      const size_t font_weight)

DrawSetFontWeight() sets the font weight to use when annotating with text.- wand: the drawing wand. - font_weight: font weight (valid range 100-900)

DrawSetGravity

C

void DrawSetGravity(DrawingWand *wand,const GravityType gravity)

DrawSetGravity() sets the text placement gravity to use when annotating with text.- wand: the drawing wand. - gravity: positioning gravity (NorthWestGravity, NorthGravity, NorthEastGravity, WestGravity, CenterGravity, EastGravity, SouthWestGravity, SouthGravity, SouthEastGravity)

DrawSetStrokeColor

C

void DrawSetStrokeColor(DrawingWand *wand,
      const PixelWand *stroke_wand)

DrawSetStrokeColor() sets the color used for stroking object outlines.

- wand: the drawing wand. - stroke_wand: stroke wand.

DrawSetStrokePatternURL

C

MagickBooleanType DrawSetStrokePatternURL(DrawingWand *wand,
      const char *stroke_url)

DrawSetStrokePatternURL() sets the pattern used for stroking object outlines.- wand: the drawing wand. - stroke_url: URL specifying pattern ID (e.g. "#pattern_id")

DrawSetStrokeAntialias

C

void DrawSetStrokeAntialias(DrawingWand *wand,
      const MagickBooleanType stroke_antialias)

DrawSetStrokeAntialias() controls whether stroked outlines are antialiased. Stroked outlines are antialiased by default. When antialiasing is disabled stroked pixels are thresholded to determine if the stroke color or underlying canvas color should be used.- wand: the drawing wand. - stroke_antialias: set to false (zero) to disable antialiasing

DrawSetStrokeDashArray

C

MagickBooleanType DrawSetStrokeDashArray(DrawingWand *wand,
      const size_t number_elements,const double *dasharray)

DrawSetStrokeDashArray() specifies the pattern of dashes and gaps used to stroke paths. The stroke dash array represents an array of numbers that specify the lengths of alternating dashes and gaps in pixels. If an odd number of values is provided, then the list of values is repeated to yield an even number of values. To remove an existing dash array, pass a zero number_elements argument and null dasharray. A typical stroke dash array might contain the members 5 3 2.- wand: the drawing wand. - number_elements: number of elements in dash array - dasharray: dash array values

DrawSetStrokeDashOffset

C

void DrawSetStrokeDashOffset(DrawingWand *wand,
      const double dash_offset)

DrawSetStrokeDashOffset() specifies the offset into the dash pattern to start the dash.- wand: the drawing wand. - dash_offset: dash offset

DrawSetStrokeLineCap

C

void DrawSetStrokeLineCap(DrawingWand *wand,
      const LineCap linecap)

DrawSetStrokeLineCap() specifies the shape to be used at the end of open subpaths when they are stroked. Values of LineCap are UndefinedCap, ButtCap, RoundCap, and SquareCap.- wand: the drawing wand. - linecap: linecap style

DrawSetStrokeLineJoin

C

void DrawSetStrokeLineJoin(DrawingWand *wand,
      const LineJoin linejoin)

DrawSetStrokeLineJoin() specifies the shape to be used at the corners of paths (or other vector shapes) when they are stroked. Values of LineJoin are UndefinedJoin, MiterJoin, RoundJoin, and BevelJoin.- wand: the drawing wand. - linejoin: line join style

DrawSetStrokeMiterLimit

C

void DrawSetStrokeMiterLimit(DrawingWand *wand,
      const size_t miterlimit)

DrawSetStrokeMiterLimit() specifies the miter limit. When two line segments meet at a sharp angle and miter joins have been specified for 'lineJoin', it is possible for the miter to extend far beyond the thickness of the line stroking the path. The miterLimit' imposes a limit on the ratio of the miter length to the 'lineWidth'.- wand: the drawing wand. - miterlimit: miter limit

DrawSetStrokeOpacity

C

void DrawSetStrokeOpacity(DrawingWand *wand,
      const double stroke_opacity)

DrawSetStrokeOpacity() specifies the opacity of stroked object outlines.- wand: the drawing wand. - stroke_opacity: stroke opacity. The value 1.0 is opaque.

DrawSetStrokeWidth

C

void DrawSetStrokeWidth(DrawingWand *wand,
      const double stroke_width)

DrawSetStrokeWidth() sets the width of the stroke used to draw object outlines.- wand: the drawing wand. - stroke_width: stroke width

DrawSetTextAlignment

C

void DrawSetTextAlignment(DrawingWand *wand,const AlignType alignment)

DrawSetTextAlignment() specifies a text alignment to be applied when annotating with text.- wand: the drawing wand. - alignment: text alignment. One of UndefinedAlign, LeftAlign, CenterAlign, or RightAlign.

DrawSetTextAntialias

C

void DrawSetTextAntialias(DrawingWand *wand,
      const MagickBooleanType text_antialias)

DrawSetTextAntialias() controls whether text is antialiased. Text is antialiased by default.- wand: the drawing wand. - text_antialias: antialias boolean. Set to false (0) to disable antialiasing.

DrawSetTextDecoration

C

void DrawSetTextDecoration(DrawingWand *wand,
      const DecorationType decoration)

DrawSetTextDecoration() specifies a decoration to be applied when annotating with text.- wand: the drawing wand. - decoration: text decoration. One of NoDecoration, UnderlineDecoration, OverlineDecoration, or LineThroughDecoration

DrawSetTextDirection

C

void DrawSetTextDirection(DrawingWand *wand,
      const DirectionType direction)

DrawSetTextDirection() specifies the direction to be used when annotating with text.- wand: the drawing wand. - direction: text direction. One of RightToLeftDirection, LeftToRightDirection

DrawSetTextEncoding

C

void DrawSetTextEncoding(DrawingWand *wand,const char *encoding)

DrawSetTextEncoding() specifies the code set to use for text annotations. The only character encoding which may be specified at this time is "UTF-8" for representing Unicode as a sequence of bytes. Specify an empty string to set text encoding to the system's default. Successful text annotation using Unicode may require fonts designed to support Unicode.- wand: the drawing wand. - encoding: character string specifying text encoding

DrawSetTextKerning

C

void DrawSetTextKerning(DrawingWand *wand,const double kerning)

DrawSetTextKerning() sets the spacing between characters in text.- wand: the drawing wand. - kerning: text kerning

DrawSetTextInterlineSpacing

C

void DrawSetTextInterlineSpacing(DrawingWand *wand,
      const double interline_spacing)

DrawSetTextInterlineSpacing() sets the spacing between line in text.- wand: the drawing wand. - interline_spacing: text line spacing

DrawSetTextInterwordSpacing

C

void DrawSetTextInterwordSpacing(DrawingWand *wand,
      const double interword_spacing)

DrawSetTextInterwordSpacing() sets the spacing between words in text.- wand: the drawing wand. - interword_spacing: text word spacing

DrawSetTextUnderColor

C

void DrawSetTextUnderColor(DrawingWand *wand,
      const PixelWand *under_wand)

DrawSetTextUnderColor() specifies the color of a background rectangle to place under text annotations.- wand: the drawing wand. - under_wand: text under wand.

DrawSetVectorGraphics

C

MagickBooleanType DrawSetVectorGraphics(DrawingWand *wand,
      const char *xml)

DrawSetVectorGraphics() sets the vector graphics associated with the specified wand. Use this method with DrawGetVectorGraphics() as a method to persist the vector graphics state.- wand: the drawing wand. - xml: the drawing wand XML.

DrawSkewX

C

void DrawSkewX(DrawingWand *wand,const double degrees)

DrawSkewX() skews the current coordinate system in the horizontal direction.- wand: the drawing wand. - degrees: number of degrees to skew the coordinates

DrawSkewY

C

void DrawSkewY(DrawingWand *wand,const double degrees)

DrawSkewY() skews the current coordinate system in the vertical direction.- wand: the drawing wand. - degrees: number of degrees to skew the coordinates

DrawTranslate

C

void DrawTranslate(DrawingWand *wand,const double x,
      const double y)

DrawTranslate() applies a translation to the current coordinate system which moves the coordinate system origin to the specified coordinate.- wand: the drawing wand. - x: new x ordinate for coordinate system origin - y: new y ordinate for coordinate system origin

DrawSetViewbox

C

void DrawSetViewbox(DrawingWand *wand,ssize_t x1,
      ssize_t y1,ssize_t x2,ssize_t y2)

DrawSetViewbox() sets the overall canvas size to be recorded with the drawing vector data. Usually this will be specified using the same size as the canvas image. When the vector data is saved to SVG or MVG formats, the viewbox is use to specify the size of the canvas image that a viewer will render the vector data on.- wand: the drawing wand. - x1: left x ordinate - y1: top y ordinate - x2: right x ordinate - y2: bottom y ordinate

IsDrawingWand

C

MagickBooleanType IsDrawingWand(const DrawingWand *wand)

IsDrawingWand() returns MagickTrue if the wand is verified as a drawing wand.- wand: the drawing wand.

NewDrawingWand

C

DrawingWand *NewDrawingWand(void)

NewDrawingWand() returns a drawing wand required for all other methods in the API.<h2><a href="http://www.imagemagick.org/api/MagickWand/drawing-wand_8c.html" id="PeekDrawingWand">PeekDrawingWand</a></h2>PeekDrawingWand() returns the current drawing wand.The format of the PeekDrawingWand method is:<pre class="text">DrawInfo \*PeekDrawingWand(const DrawingWand \*wand)</pre>- wand: the drawing wand.

PopDrawingWand

C

MagickBooleanType PopDrawingWand(DrawingWand *wand)

PopDrawingWand() destroys the current drawing wand and returns to the previously pushed drawing wand. Multiple drawing wands may exist. It is an error to attempt to pop more drawing wands than have been pushed, and it is proper form to pop all drawing wands which have been pushed.- wand: the drawing wand.

PushDrawingWand

C

MagickBooleanType PushDrawingWand(DrawingWand *wand)

PushDrawingWand() clones the current drawing wand to create a new drawing wand. The original drawing wand(s) may be returned to by invoking PopDrawingWand(). The drawing wands are stored on a drawing wand stack. For every Pop there must have already been an equivalent Push.- wand: the drawing wand.